Performances and Safety
Panda - 1.2 69 HP petrol engine
TOP SPEED
mph
ACCELERATION
0-62 MPH (s).
MAX. POWER
hp (KW) at rpm
69 (51) @ 5500
MAX. TORQUE
N m @ rpm
102 (10.4) @ 3000
CONSUMPTION
(L/100 km): 48.7
39.7 (7.2) URBAN CYCLE
57.6 (4.9) EXTRA-URBAN CYCLE
48.7 (5.8) COMBINED CYCLE
CO2 EMISSIONS
(g/km)
Engine emissions level:
Euro 6D
Available with 5-speed manual transmission
5-SpeedFuel consumption figures determined on the basis of the new WLTP test procedure as per Regulation (EU) 2017/1347. CO2 figures, determined on the basis of the outgoing test cycle as per Regulation (EU) 2017/1152-1153, will be used to calculate vehicle tax on first registration. Only compare fuel consumption and CO2 figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the accessories fitted (post-registration), variations in weather, driving styles and vehicle load.
Panda - 1.2 69 HP petrol engine (B)*
TOP SPEED
mph
ACCELERATION
0-62 MPH (s).
MAX. POWER
hp (KW) at rpm
95 (70) @ 6000
MAX. TORQUE
N m @ rpm
127 @ 4500
CONSUMPTION
mpg(l/100 km)
36.7 (7.7) URBAN CYCLE
62.8 (4.5) EXTRA-URBAN CYCLE
49.6 (5.7) COMBINED CYCLE
CO2 EMISSIONS
(g/km)
Engine emissions level:
Euro 6Available with 5-speed manual transmission
5-Speed (A) indicates the value of CO2 and consumption determined on the basis of the NEDC cycle as per EU Regulation 692/2008.
(B) The specification (B) indicates the value of CO2 and consumption determined on the basis of the measurement / correlation method referring to the NEDC cycle as per Regulation (EU) 2017/1152-1153.
(C) The specification (C) indicates the value of CO2 and consumption determined on the basis of the new WLTP test procedure as per Regulation (EU) 2017/1347.
The CO2 and fuel consumption values obtained according to applicable regulation are indicated in order to allow the comparison of vehicle data. The homologation values of CO2 and fuel consumption may not reflect the actual values of CO2 and fuel consumption, which depend on many factors related, by way of example but not limitation, to the driving style, the route, the weather and road conditions, the condition, use and equipment of the vehicle.
The indicated value of CO2 and fuel consumption refers to the versions of the vehicle with the highest and the lowest values. Those values may change with the subsequent configuration depending on equipment selected and/or size of tires selected.
The indicated values of CO2 and fuel consumption are not definitive and may evolve as a result of changes in the production cycle; more up-to-date values will be available at the selected official dealer of the FCA network.
In any case, the official values of CO2 and fuel consumption of the vehicle purchased by the customer will be provided with the documents accompanying the vehicle.
In cases where the values of CO2 and fuel consumption are relevant for the purposes of calculating taxes and duties related to the vehicle, reference should be made to the applicable laws in each country.
Scopri i test https://www.fiat.it/nuovi-test-wltp-emissioni-e-consumiLearn more [insert hyperlink to WLTP page] about the new tests for the certification of fuel consumption, CO2 and pollutant emissions
Petrol 0.9 TwinAir 90HP Start&Stop
TOP SPEED
mph
ACCELERATION
0 -62 mph (s)
MAX POWER
hp (kW) at rpm
85 (63) at 5500
MAX TORQUE
N m at rpm
145 at 1900
CONSUMPTION
mpg
47.9 (5.9) URBAN CYCLE
50.4 (5.6) EXTRA-URBAN CYCLE
49.6 (5.7) COMBINED CYCLE
CO2 EMISSIONS
g/km
Engine emissions level
Euro 6d-Temp
Available with
6-speed manual transmissionFuel consumption and CO2 figures are obtained for comparative purposes in accordance with EC directives/regulations and may not be representative of real-life driving conditions.
Factors such as driving style, weather and road conditions may also have a significant effect on fuel consumption.
Panda - 1.2 69 HP petrol engine
TOP SPEED
mph
ACCELERATION
0-62 MPH (s).
MAX. POWER
hp (KW) at rpm
69 (51) @ 5500
MAX. TORQUE
N m @ rpm
102 (10.4) @ 3000
CONSUMPTION
(L/100 km): 48.7
39.7 (7.2) URBAN CYCLE
57.6 (4.9) EXTRA-URBAN CYCLE
48.7 (5.8) COMBINED CYCLE
CO2 EMISSIONS
(g/km)
Engine emissions level:
Euro 6DAvailable with 5-speed manual transmission
5-SpeedFuel consumption figures determined on the basis of the new WLTP test procedure as per Regulation (EU) 2017/1347. CO2 figures, determined on the basis of the outgoing test cycle as per Regulation (EU) 2017/1152-1153, will be used to calculate vehicle tax on first registration. Only compare fuel consumption and CO2 figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the accessories fitted (post-registration), variations in weather, driving styles and vehicle load.
Panda - 1.2 69 HP petrol engine (B)*
TOP SPEED
mph
ACCELERATION
0-62 MPH (s).
MAX. POWER
hp (KW) at rpm
95 (70) @ 6000
MAX. TORQUE
N m @ rpm
127 @ 4500
CONSUMPTION
mpg(l/100 km)
36.7 (7.7) URBAN CYCLE
62.8 (4.5) EXTRA-URBAN CYCLE
49.6 (5.7) COMBINED CYCLE
CO2 EMISSIONS
(g/km)
Engine emissions level:
Euro 6Available with 5-speed manual transmission
5-Speed (A) indicates the value of CO2 and consumption determined on the basis of the NEDC cycle as per EU Regulation 692/2008.
(B) The specification (B) indicates the value of CO2 and consumption determined on the basis of the measurement / correlation method referring to the NEDC cycle as per Regulation (EU) 2017/1152-1153.
(C) The specification (C) indicates the value of CO2 and consumption determined on the basis of the new WLTP test procedure as per Regulation (EU) 2017/1347.
The CO2 and fuel consumption values obtained according to applicable regulation are indicated in order to allow the comparison of vehicle data. The homologation values of CO2 and fuel consumption may not reflect the actual values of CO2 and fuel consumption, which depend on many factors related, by way of example but not limitation, to the driving style, the route, the weather and road conditions, the condition, use and equipment of the vehicle.
The indicated value of CO2 and fuel consumption refers to the versions of the vehicle with the highest and the lowest values. Those values may change with the subsequent configuration depending on equipment selected and/or size of tires selected.
The indicated values of CO2 and fuel consumption are not definitive and may evolve as a result of changes in the production cycle; more up-to-date values will be available at the selected official dealer of the FCA network.
In any case, the official values of CO2 and fuel consumption of the vehicle purchased by the customer will be provided with the documents accompanying the vehicle.
In cases where the values of CO2 and fuel consumption are relevant for the purposes of calculating taxes and duties related to the vehicle, reference should be made to the applicable laws in each country.
Scopri i test https://www.fiat.it/nuovi-test-wltp-emissioni-e-consumiLearn more [insert hyperlink to WLTP page] about the new tests for the certification of fuel consumption, CO2 and pollutant emissions
Petrol 0.9 TwinAir 90HP Start&Stop
TOP SPEED
mph
ACCELERATION
0 -62 mph (s)
MAX POWER
hp (kW) at rpm
85 (63) at 5500
MAX TORQUE
N m at rpm
145 at 1900
CONSUMPTION
mpg
47.9 (5.9) URBAN CYCLE
50.4 (5.6) EXTRA-URBAN CYCLE
49.6 (5.7) COMBINED CYCLE
CO2 EMISSIONS
g/km
Engine emissions level
Euro 6d-TempAvailable with
6-speed manual transmissionFuel consumption and CO2 figures are obtained for comparative purposes in accordance with EC directives/regulations and may not be representative of real-life driving conditions.
Factors such as driving style, weather and road conditions may also have a significant effect on fuel consumption.